Blum #2 POZI hand screwdriver - special screwdriver (different from Phillips) to apply full torque to all Blum adjustment screws.

Set includes left and right side adapters, profile adater and installation instructions

For use in face frame applications.

Integrated 1/8" distance bumper for use with inset and/or overlay applications Comes with adjustable stop with 5/32" depth range for consistently accurate stops and perfectly aligned

For TANDEMBOX D back height drawer configuration.

Can be used to insert all Blum press-in hinges.

8mm square head dowel for attaching to hinges.

Screws and sleeves for back-to-back plate mounting on a shared panel.

Flush mounted RTA assembly fitting with nylon housing and zinc galvanized steel connector screw. Used for drop-in shelves. Connector screw is placed in a 5mm hole.

Surface mount cover cap - white nylon. Conceals the mounting screw on screw-on leg levelers (part # B69-7200) or the screwdriver hole on press-in leg levelers (part#B61-1120-77).

Leg leveler with 3-3/4" to 5-1/2" adjustment range and zinc coated steel mounting screw - black ABS plastic. 850 lbs capacity per set of four. Sold individually.

Clips are fastened to the toekick board. Clips snap around leg levelers and the side-to-side adjustment aids in alignment.

For pre-boring of BLUMOTION 970A and 970

For "Lip Door Application". Mounts under clip plates and reduces overlay by 3mm. Brown nylon.