Full 1/2" lockbar throw for doors up to 102" tall. Lockbars can be trimmed down for shorter doors. Requires a 16.5mm lock hole.

Allows cylinder bodies to be used with 3/4" to 7/8" diameter holes and permits use of locks in 7/8" thick panels

Required to remove Lock Plugs in cylinder bodies

Note: All Stike Plates are black in color

Easily supports twice the fully loaded weight of paper. Weight is supported by the top of the drawer, not screws. Withstands 50,000 back and forth cycles without paint wear or other ....

Locks both doors without the use of a spring catch. Required 16.5mm hole.

Vertical mount deadbolt lock for doors. Requires 16.5mm diameter hole. Comes with attractive tough nylon housing. Mounts in 3/4" material.

Horizontal mount deadbolt lock for drawers. Requires 16.5mm diameter hole. Comes with attractive tough nylon housing and a 3/8" throw. Mounts in 3/4" material.

Lock is mounted in the fixed rail. Fits within 1/2" drawer slide clearance. Minimal machining required - only a hole for the lock and a groove for the lockbar is needed.

Lock is mounted in the drawer front. Minimizes interference with hanging files. Full 1/2" lockbar throw. Fits within 1/2" drawer slide clearance. Minimal machining required - only a ....

Lock is front mounted with the Lockbar located further back in the case. Fits within 1/2" drawer slide clearance. Minimal machining required - only a hole for the lock and a groove ....

Lock is sidemounted in the drawer front. Minimizes interference with hanging files. Full 1/2" lockbar throw. Fits within 1/2" drawer slide clearance. Minimal machining required - only ....

Any Timberline Lock Plug snaps into any Timberline Cylinder Body. Furniture can be keyed easily to the Customers requiremnet at any time and the key numbers can readily be changed by ....

Requires 16.5mm diameter hole. Mounts in 3/4" material.

Requires 16.5mm diameter hole