Wood door pivot hinge. Stamped steel. Polybagged with 2 - hinges, 2 - plastic bushings and mounting screws.

1-7/8" center-to-center, back mounted, architectural drawer and door pull for 1/2" to 7/8" material thickness - extruded aluminum Polybagged with 2 - # 6 x 1/2" mounting screws.

1" center-to-center, back mounted, architectural drawer and door pull for 1/2" to 7/8" material thickness - extruded aluminum Polybagged with 2 - # 6 x 1/2" mounting screws.

Flush mortise mounted, architectural drawer and door pull for 3/4" material thicknesses - extruded aluminum. Polybagged with # 6 x 5/8" mounting screws.

Flush mortise mounted, architectural drawer and door pull for 3/4" material thickness - extruded aluminum. Polybagged with 2 - # 6 x 5/8" mounting screws.

Top mounted, architectural drawer and door pull for 5/8" - 1-1/4" material thickness - extruded aluminum. No holes, no screws. Individually polybagged.

Stick-on plastic pull with pressure sensitive sensitive adhesive back. For use on glass and wood doors of any thickness.

25/64" diameter, plastic pulls. Polybagged with mounting screws.

Zinc die cast pull for institutional and commercial applications with 4" center-to-center holes.

Solid brass, sliding door pull for wood door thickness of 1/4" to 1/2". Mortises into a 1-5/8" hole.

Adjustable tension, ball catch. Turn screws to adjust tension. Solid brass case. Polybagged with screws.

Adjustable tension ball catch with solid brass. Polybagged with screws.