60° Signmaking/Lettering Bit. Originally developed specifically for professional signmakers in Europe, this tool features a solid carbide, razor sharp, 3-flute cutting edge with extra ....

6° negative hook, 13mm pitch, triple chip (TC) grind. Specially designed carbide and blade geometry for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames. ....

2° negative hook, triple chip (TC) grind. Special application blade for acrylic sheets, Plexiglas®, Lexan®, etc. 2° negative hook angle reduces the tendency of chip-welding or melting ....

10° hook, 10mm pitch, alternate top bevel (ATB) or triple chip (TC) grind. Designed for mitre smooth cuts; less drag on bearings and brake reduces stock loss on expensive woods and ....

70mm long, 10mm x 30mm shank.

70mm long, 10mm x 30mm shank.

Right hand, 57mm long, 10mm shank, 2 wing with spurs.

2 Flute roman ogee bit with ball bearing guide. (Replacement bearing sold separately).

2 flute dovetail bits. (Replacement bearings and snap ring sold separately as part #'s AM47712 and AM47752).

2 flute core box bits.

2 flute mortising bits.

2 Flute rabbeting bit with ball bearing guide. Depth of rabbet is 3/8". (replacement bearings sold separately).

2 Flute rabbeting bit with 4 ball bearings. Four different rabbet depths. Kit includes: 4 - bearings, hex key, washer and screw. (Replacement bearings sold separately).

2 Flute Super Rabbeting Bit with ball bearing guides. An ingenious rabbeting bit that will enable rabbet cuts from 1/16" through 3/4" in 1/16" increments, and five undersized plywood ....

3 Wing slotting cutter